AccreditedBusiness
Projects › Standing Seam Metal Roofing

Luxury Estate Standing Seam

Waterbury, Vermont — 24-Gauge Englert Forest Green, Bent Onsite

Request a Quote Call 802-210-5987
Location Waterbury, VT
Type Residential — Luxury Estate
Material 24-Gauge Englert Standing Seam — Forest Green
Underlayment Sharkskin Ultra SA
Panels Bent Onsite
Project Overview

Standing seam metal
done at the highest level.

Rivers Construction completed a full standing seam metal roof replacement on a large luxury Victorian estate in Waterbury, Vermont. This was not a simple reroof — the building features a highly complex multi-peak roofline with multiple valleys, dormers, chimneys, and intersecting planes that demand exact panel fabrication and precision installation at every transition.

We specified 24-gauge Englert standing seam panels in Forest Green — a commercial-grade, concealed-clip system with a Kynar 500 PVDF finish that resists chalking, fading, and Vermont's freeze-thaw cycle for decades. Panels were bent onsite to match the building's exact measurements, ensuring tight seams and eliminating field waste. The full deck was covered with Sharkskin Ultra SA self-adhering underlayment before any metal went down.

The result — visible in the before and after drone footage below — is a complete transformation. The old brown asphalt shingle roof has been replaced with a dramatic forest green standing seam system that elevates the property to another level and is built to last 50+ years with minimal maintenance.

  • Full tear-off of existing asphalt shingle roofing system
  • Complete roof deck inspection and sheathing repairs where needed
  • Sharkskin Ultra SA self-adhering underlayment — full deck coverage
  • 24-gauge Englert standing seam panels — Forest Green
  • Kynar 500 PVDF factory finish — fade and chalk resistant
  • Concealed clip fastening system — zero exposed fasteners
  • Panels roll-formed and bent onsite to exact measurements
  • Custom valley, hip, ridge, and chimney flashings fabricated onsite
  • Precision panel layout across multiple dormers and intersecting planes
  • Full debris removal and complete site restoration
Get a Standing Seam Quote
Completed 24-gauge Englert forest green standing seam metal roof on luxury Victorian estate in Waterbury Vermont — overhead aerial drone view by Rivers Construction
Before — old asphalt shingle roof on Waterbury Vermont luxury estate prior to standing seam metal replacement by Rivers Construction Before
During — 24-gauge Englert forest green standing seam panels being installed on Waterbury Vermont estate with Sharkskin underlayment visible on unfinished sections During
After — completed 24-gauge Englert forest green standing seam metal roof on luxury Victorian estate Waterbury Vermont, overhead aerial showing full multi-peak roofline After
Completed Englert forest green standing seam metal roof on luxury estate Waterbury Vermont — aerial view showing full roofline and white exterior After
Completed Englert standing seam metal roof Waterbury Vermont with Vermont Green Mountains and Mount Mansfield in background — aerial drone shot After
Technical Breakdown

What makes this
a 50-year roof.

24-Gauge Englert Panels

Standard residential standing seam often uses 26-gauge steel — functional, but with more thermal movement and less rigidity on complex rooflines. We specified 24-gauge Englert for this estate because the thicker steel holds tighter tolerances across long panel runs, handles Vermont's heavy snow loads with greater structural integrity, and delivers a stiffer, more premium result. The difference is visible and audible — 24-gauge doesn't rattle or oil-can under temperature swings the way lighter gauge material does.

Bent Onsite — Exact Fit Every Time

Ordering pre-cut panels for a roof like this is a recipe for gaps, field adjustments, and waste. We brought the roll-former onsite and fabricated every panel to the exact measurements of each roof plane. This means every panel is the precise length for its location — no field splices, no off-cuts, no guesswork. The result is a cleaner installation with tighter seams and panels that run perfectly true from ridge to eave on every pitch, including all the dormers and intersecting valleys.

Sharkskin Ultra SA Underlayment

Sharkskin Ultra SA is a self-adhering synthetic underlayment that bonds directly to the roof deck, creating a fully waterproofed membrane before the first panel goes down. Unlike felt paper, Sharkskin won't absorb moisture, tear during installation, or degrade under a metal roof's thermal cycling. It also acts as a vapor retarder and noise-dampening layer — reducing the sound of rain and hail transmission into the living space below, which matters on a residence of this caliber.

Concealed Clip Fastening

Every panel is held by concealed clips that allow the metal to float — expanding and contracting freely through Vermont's temperature extremes — without telegraphing fastener locations through the panel face. There are zero exposed screws or nails on the finished roof. This is both the most aesthetically clean method and the most durable: exposed fasteners eventually back out as metal moves seasonally; concealed clips never do. It's also what separates a true standing seam system from a screw-down profile.

Panel SystemEnglert concealed-clip standing seam
Gauge24-gauge Galvalume steel
ColorForest Green — Kynar 500 PVDF finish
Panel FabricationRoll-formed and bent onsite to exact measurements
UnderlaymentSharkskin Ultra SA self-adhering synthetic
FasteningConcealed floating clip — zero exposed fasteners
FlashingsCustom-fabricated onsite — valleys, hips, ridges, chimneys
Expected Lifespan50+ years with minimal maintenance
Wind ResistanceEngineered for 140+ mph wind uplift

Standing Seam Metal Roofing Across Vermont

Rivers Construction installs standing seam metal roofing on luxury estates, commercial buildings, and high-end residential properties throughout Vermont — including Waterbury, Stowe, Burlington, Essex, Williston, Shelburne, South Burlington, and Washington County. We bring the roll-former to your site, fabricate panels to exact measurements, and deliver a finished product that stands out in Vermont. If you're considering standing seam, call us — we'll walk you through every gauge, profile, and color option.

Standing Seam Metal Roofing Vermont

Standing seam metal
roofing in Vermont?

Luxury-grade Englert panels. Bent onsite. Sharkskin underlayment. Concealed clip system. The last roof you'll ever put on. Free estimates across Vermont.

Request a Quote Call 802-210-5987